Trang Chủ
1
Sản Phẩm
2
Taiwan CPC Thanh tuyến tính / Slide block-CPC-ARC/HRC/ERC Ball Type Linear Guide Series3

Trang Chủ Sản Phẩm > CPC Thanh tuyến tính tiêu chutẩtn- STANDARD BEARING LINEAR GUIDE-CPC > CPC ARC/HRC/ERC series > Taiwan CPC Thanh tuyến tính / Slide block-CPC-ARC/HRC/ERC Ball Type Linear Guide Series

ARC/HRC/ERC SERIES

Taiwan CPC Thanh tuyến tính / Slide block-CPC-ARC/HRC/ERC Ball Type Linear Guide Series

Đài loan - Taiwan - CPC Linear guide 台灣直得

ARC15MS / ARC15MN / ARC15ML / ARC15FS /ARC15FN / ARC20MS / ARC20MN / ARC20ML / ARC20FS / ARC20FN
/ ARC25MS / ARC25MN / ARC25FS / ARC25FN / ARC30MS / ARC30MN / ARC30ML / ARC30FS / ARC30FN / ARC35MN / ARC35ML / ARC35FN / ARC45MN / ARC45FN /
HRC15MN / HRC15ML / HRC15FN / HRC20MN / HRC20ML / HRC20FN / HRC20FL / HRC25MN / HRC25ML / HRC25FN / HRC25FL / HRC30MN / HRC30ML / HRC30FN / HRC30FL / HRC35MN / HRC35ML / HRC35FN / HRC35FL / HRC45MN / HRC45ML / HRC45FN / HRC45FL

Acceleration test
The acceleration test is based on a slide-crank mechanism with a flywheel as the crank. The
crank imparts high acceleration and speed to the block with finite stroke. By adjusting the
rotational speed of the motor, the service life of the block can be determined at different
accelerations and speeds.
 

 


AR-001.gif 

dot Lubricant injection/replenish in all directions

dot Dust protection using double-wipe- blade end seals, standard and reinforced types

dot Corrosion resistant surface

dot Equal load capacity in all directions

 
dot Both downward-bolt and upward-bolt track rails available
 
dot High rigidity structure
 
dot Reduced lubrication requirements for environmental soundness and maintenance cost saving
 
 
The ARC/HRC/ERC Ball Type Linear Guide Series
use four rows of re-circulating steel balls arranged in O-shape and at 45º contact angle with the raceway, achieving superior load capacity and track
rail rigidity. The use of larger steel balls in greater quantities helps increase the load capacity, moment capacity and rigidity.
 AR-002.gif
 
dot Built-in lubricant storage and supply system
 
The internal PU lubrication storage pad design allows direct contact of the lubricant with all
steel balls without adding extra length to the runner block. This ensures effective long-term
lubrication for environmental soundness and maintenance cost saving. Excellent performances are
achieved with short stroke applications.
AR-003.gif
 
dot Dustproof design
 

Standard seals (S) -
Our standard seals are in direct contact with the rail surface, giving them increased dustproof and lubcrication retenion capabilities.  cpc recommends this class of seal for blocks that operate in environments high in foreign particles, such as sawdust, for long periods of time.  S-type seals will have a compratively higher friction then B-Type seals.

Low friction seals (B) -
Our low-friction seals have slight contact with the rail and are suitable for most environments, with both low friction and a scraper function.

 AR-004.gif
 
 
dotReinforcement plate design (Patented)
 
Using 2 stainless steel reinforcement plates, the L type design allows for screws to be fastened onto the top and bottom of the runner block, reinforcing the rigidity and cladding of its caps.
The clearance between the rail profile with the seal design is below 0.3mm, reinforcing the steel plates while enabling scraper functions.

 

Vmax >10 m/s           amax >500m/s2
 
AR-005.gif

CPC ARC/HRC/ERC series 1391132