Home
1
Products
2
LUSON - LUYAN - Torque Motor3

Home Products > LUSON MOTION MOTOR > Motors > Torque motor > LUSON - LUYAN - Torque Motor

LUSON-Động cơ

LUSON - LUYAN - Torque Motor

如展 LUSON - 台灣如陽 LUYANG Torque Motor

**RPM and torque can be set to any desired level by changing the input voltage
**Torque will be enhanced while stalled
**High starting torque(torque is highest at zero speed and decreases steadily with increasing speed)
**Stable operation at low speed range or under a locked rotor condition
**60V for operating indefinitely;60V above for short-time operating
**3W~40W

 
 
ModelABCBDBEIGPZESHAFTWeight(KG)
LKS(Round Shaft)D
2TK3A(GN)-AP601007624542.570549.51865.20.96
3TK6A(GN)-AP701128032642.5826582565.21.32
4TK10A(GN)-AP801188632732.594766.525871.54
5TK20A(GN)-AP9014410638833104773.6301092.72
9016312538833104773.63010/129/112.72
5TK40A(GU)-AP9018614838833104773.63012113.59
Motors of Features
  • Torque motor is a specialized form of induction motor which is capable of operating indefinitely while stalled.
    60V for operating indefinitely; 60V above for short-time operating; 100V only for 5 minutes operating.
    Torque will be enhanced while stalled, howerver over mechanical enduring torque and hard hit stop are probibited.
  • A common application of a torque motor would be the supply and take-up reel motor in a tape drive.
    Motors allow a relatively constant light tension to the applied to the tape.
Types of Torque Motors
  • Inside torque motor (controller is included)
    Voltage adjust controller is equipped inside terminal box.
  • Torque motor( controller is not included.
    Voltage aduust controller is equipped outside motor.
Motor TypeOperating TimeOutputVoltageHZrpmStarting TorqueRated TorqueRated CurrentCapacitance
2TK3A(GN)-AP5 mins/continuous3/1110/60507500.7/0.250.39/0.130.55/0.37
3.5/1.2110/60609000.7/0.250.38/0.130.55/0.37
3TK6A(GN)-AP5 mins/continuous6/2.5110/60507501.4/0.550.78/0.320.83/0.4510
7.5/2.7110/60609001.4/0.450.82/0.290.77/0.458
4TK10A(GN)-AP5 mins/continuous10/3.5110/60507502.2/0.751.30/0.460.99/0.512
12/3.5110/60609002.1/0.71.30/0.380.94/0.508
5TK20A(GN)-AP5 mins/continuous20/6110/60507503.5/1.12.6/0.781.21/0.715
20/6110/60609003.0/1.02.2/0.651.11/0.712
5TK40A(GX)-AFP5 mins/continuous40/14110/60507507.6/3.25.2/1.852.75/1.640
40/14110/60609006.3/2.34.4/1.552.64/1.525
2TK3A(GN)-CP5 mins/continuous3/1220/110507500.7/0.250.39/0.130.55/0.31.5
3.5/1.2220/110609000.7/0.250.38/0.130.55/0.31.5
3TK6A(GN)-CP5 mins/continuous6/2.5220/110507501.4/0.550.78/0.320.83/0.452
7.5/2.7220/110609001.4/0.450.82/0.290.77/0.452
4TK10A(GN)-CP5 mins/continuous10/3.5220/110507502.2/0.751.30/0.460.99/0.52
12/3.5220/110609002.1/0.71.30/0.380.94/0.502
5TK20A(GN)-CP5 mins/continuous20/6220/110507503.5/1.12.6/0.781.21/0.73
20/6220/110609003.0/1.02.2/0.651.11/0.73
5TK40A(GN)-CFP5 mins/continuous40/14220/110507507.6/3.25.2/1.852.75/1.66
40/14220/110609006.3/2.34.4/1.552.64/1.56
Note
Add "R" means torque motor with voltage adjust controller.
  • Voltage:110/60 -> Supply voltage is 110V, however adjusting to 110V by VR for 5 mins operating, to 60V below for indefinite operating.
  • Voltage:220/110 -> Supply voltage is 220V, however adjusting to 220V by VR for 5 mins operating, to 110V below for indefinite.
Torque motor 1392456